It is secured with 2 screws and has 2 connectors. The stand supports an adjustable tilt angle between 10 and 40 degrees from the vertical. If you want to connect multiple devices to the network, connect a router or hub not shown to the modem with an Ethernet cable, and then connect the computer to the router with an Ethernet cable. Remove the cables from the metal clips built into the computer 3. Setting up a Wired Home Network. Coaxal Cable Connector Description. Plug the power adapter into the computer.
|Date Added:||10 February 2013|
|File Size:||39.95 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Remove the four Phillips mounting screws 1 that secure the drive to the cage. Rotate the locking lever to its full open position 1raise and rotate the microprocessor retainer to its full open position 2and then carefully lift the processor from the socket 3.
Remove the system board to disconnect the display cable from the display panel shown in the following procedure. Route your cables through the notch in the stand Aand through the cable routing touhcsmart Band connect each to its connector on the computer.
Keyboard, jade for use in the Czech Republic. Activity and indicator lights LEDs Figure: The optical drive is located on the left side of the computer viewed from behind under the inverter board.
How to Pair your bluetooth headset with the HP TouchSmart PC « Computer Hardware :: WonderHowTo
Remote control models with a TV tuner. See the following image for display panel jumper settings. Pair your HP computer to a Bluetooth device, such as headphones, mobile phones, or another computer. Immediately check for an authorization message on the device you are connecting to and confirm the message or allow access. Create videos and snapshots that you can view, send by e-mail, and upload to video sharing sites.
Touch Controller Board Bluetootg.
Setting up a wireless home network First-time wireless network installation requires that you:. Turn on the computer and then the speaker system. Keyboard, jade with Beats logo for use in Norway.
Antenna for use with 2×2 WLAN module. The Volume Mixer settings window opens. A remote control is included with select models only. Thermal pad for touchsmarr with the thermal module and processor. Follow the instructions from the manufacturer.
TV setup select models only. You may need to manually synchronize the wireless keyboard or mouse if they are not functioning. Thermal pad for use with memory modules. If necessary, refer to the instructions that came with your speakers or audio receiver. Remove the 9 Torx screws circled in image that secure the system board to the computer.
Keyboard, wireless for use in Portugal. Indicates Optical Disc Drive is in use. The diagram shows the internal location of the wireless LAN top left and right, not visible externally. Incorrect installation can result in hard drive installation problems.
How to Turn on Bluetooth on an HP TouchSmart
Disconnect all cables from the system board, noting their location for reinstallation. Remove the two screws 1 that secure the module to the bracket, and then separate the module from the bracket 2. See your browser’s documentation for specific instructions.